cage assembling machine

IDEA assembles cages by means of the patented 'Schnell System' (Patented). Using three thin longitudinal wires ,which may be welded to any point of the stirrup's exterior surface IDEA cage assembling machine is able to half-assemble lattice girders of stirrups of any shape and size.

The half-assembled girder is now ready to be finished off by fixing the frame carrying bars. As the stirrups have already been welded at the correct distance, the carrying bars may be only tied every 5 or 6 stirrups.

This means:
- saving up to 60% on assembling costs;
- maximum flexibility: girders may be assembled with stirrups of any shape and size; besides this system avoids all size restrictions and material waste involved with the use of electrowelded mesh;
- high quality standards: the girders obtained with this system are far more precise and stiff than their traditional counterparts and they do not face any risk during transport.

Technical data

    Minimum stirrup
    Maximum stirrup
    Wire Ø 
    Pulling Speed
    Average power consumption

    150x150 mm (6"x6")
    1500x1500 mm (5'x5')
    6÷16 mm (#3÷#5)
    45 m/min (150 ft/min)
    8 kWh

As the products are in continuous development,
the technical specifications and images are purely by way of example and not binding.